OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P0EB5

A/C Compressor Motor Phase V Current Sensor Circuit High

P0EB5 is the high-range fault of the phase V current sensor in the compressor inverter. The reading lies above the window the sensor can produce in normal service, which points to a short towards supply voltage, a defective sensing element or an internal fault in the power module rather than to real overcurrent. Unusually, the V-phase codes start with high, low and plausibility, while the general V circuit code comes later as P0EBB. No manufacturer documents P0EB5 publicly. GM's 2011 Volt detected a stuck V-phase sensor at standstill at plus 68 A or more under the older code P0D7C, Type B. The compressor drive is switched off, and refrigerant-based battery cooling may be lost with it. Related codes: P0EB6, P0EB7 and P0EBB.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / numberE / B5

Possible causes

  • Phase V signal shorted towards supply voltage medium
  • Defective phase V sensing element high
  • Internal fault in the compressor power module low

Symptoms

  • Compressor switched off, no cooling
  • Battery may warm up more during fast charging

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for P0EB5

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication