P0EB0
A/C Compressor Motor Current Sensor Circuit High
P0EB0 flags a current sensor signal at the top end of its range, beyond what the compressor drive could ever draw. It differs from a genuine overcurrent such as P0D6F, where the measurement is trusted and the motor is overloaded: here the signal itself is suspect, for example after a short to a supply voltage or a failed sensing element. No manufacturer documents P0EB0 publicly. GM's 2011 Volt gives a feel for normal limits: more than 27 A over 30 of 60 samples counts as excessive load there, Type B. CARB demands range checks for inputs that hybrid thermal management relies on. If the reading looks plausible after a restart, a stiff compressor or an overfilled refrigerant circuit should still be ruled out. The low counterpart is P0EAF.
Possible causes
- Current signal shorted to a supply voltage medium
- Failed sensing element in the compressor inverter high
- Real overload from a stiff compressor or excessive refrigerant charge low
Symptoms
- Compressor switches off right after starting
- No cooling, fault message in the climate display
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P0EB0
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.