P0EAC
A/C Compressor Motor Voltage Sensor B Circuit Intermittent/Erratic
P0EAC points to a B voltage signal that jumps or drops out for short moments instead of staying wrong. The module sees sudden changes no real battery voltage can make, or values that come and go. Loose high-voltage or signal connectors at the compressor, vibration damage to the harness, moisture in a plug and internal contact problems on the inverter board are the usual suspects. No manufacturer documents P0EAC publicly; GM and Mitsubishi only publish steady range and plausibility checks for the A channel (P0D6A, P0D6B, P0D69). The fault may vanish after a restart and return with vibration or temperature changes. Wiggle tests are only allowed after the high-voltage circuit is isolated and verified dead. Steady faults of the same sensor are P0EA8 to P0EAB.
Possible causes
- Loose or corroded connector at the compressor high
- Harness chafed or cracked by engine and road vibration medium
- Cracked solder joint on the compressor control board low
Symptoms
- Air conditioning cuts out briefly and then resumes
- Fault entry returns after clearing
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P0EAC
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.