P0EAB
A/C Compressor Motor Voltage Sensor B Circuit Low
P0EAB is set when the B voltage channel of the electric A/C compressor reports far less than the high-voltage battery actually supplies while the contactors are closed. Typical reasons are a sense line shorted to ground, a broken internal connection or a sensing stage without supply; a supply interrupted upstream, for instance by a high-voltage fuse, produces the same picture and should be ruled out first. No manufacturer documents P0EAB publicly. For the A channel (P0D6B), GM's 2011 Volt uses 190 V or less in 30 of 60 samples, contactors closed and no faults present, Type B. CARB calls for range checks of such inputs where hybrid cooling depends on them. The air conditioning, and possibly battery cooling, fails; the high counterpart is P0EAA.
Possible causes
- Voltage sense line shorted to ground high
- High-voltage supply to the compressor interrupted (fuse, connector) medium
- Measuring stage in the compressor module without supply low
Symptoms
- No cooling from the air conditioning
- Charging power may be reduced if the battery cannot be cooled
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P0EAB
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.