OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P0EAA

A/C Compressor Motor Voltage Sensor B Circuit High

P0EAA flags a B voltage reading at the top of, or beyond, the plausible range of the compressor supply. Since the battery cannot really deliver that much, the cause usually lies in the measurement itself: an open or shorted sense path, a failed voltage divider inside the compressor or a wrong reference. No manufacturer documents P0EAA publicly. GM's 2011 Volt judges the A channel this way (P0D6A): 440 V or more in 30 of 60 samples taken every 50 ms, Type B with MIL after two trips; a single sample at 480 V or more triggers a separate maker code. A genuinely high bus voltage would also show up in battery and inverter codes, which helps to tell the two apart. The compressor normally shuts down; the low counterpart is P0EAB.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / numberE / AA

Possible causes

  • Failed voltage divider or reference in the compressor module high
  • Sense line shorted to a higher potential medium
  • Actual overvoltage on the high-voltage bus low

Symptoms

  • Compressor stops, cabin is not cooled
  • Warning in the climate control display

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for P0EAA

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication