OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P0EA8

A/C Compressor Motor Voltage Sensor B Circuit

P0EA8 is the general circuit code for the second high-voltage measurement of an electric A/C compressor, labelled sensor B. Such compressors draw their power from the traction battery and convert it in a built-in inverter; the module reads the supply voltage to control the motor and protect its power stage. Here the B signal is missing or unusable as a whole, without being classed as low, high or implausible. No manufacturer documents P0EA8 publicly, and nobody states which point sensor B measures. For the A channel, GM's 2011 Volt tables show how such inputs are judged (P0D6A at 440 V or more, P0D6B at 190 V or less, each Type B). CARB demands circuit checks on inputs that hybrid battery cooling relies on. Expect the compressor to stop; specific faults are P0EA9 to P0EAC.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / numberE / A8

Possible causes

  • Interrupted voltage sense path inside or at the compressor medium
  • Fault on the compressor's inverter or control board medium
  • Poorly seated high-voltage or signal connector at the compressor low

Symptoms

  • Air conditioning does not cool
  • Fault message for the climate system
  • Battery cooling via refrigerant may be unavailable during charging

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for P0EA8

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication