P0EA5
DC/DC Converter B Performance
P0EA5 says that a second DC/DC converter, B, does not deliver what it is asked to, for example the commanded output voltage or current, although its sensors give no circuit fault. FCA documents it as DC/DC Converter 2 Performance for the 2019 Jeep Cherokee (KL) with the 3.2 litre V6 and engine start/stop: PCM flash bulletins 18-023-19 REV. B and 18-077-22 list it with P0EA6 and with communication codes for converter control modules A and B, alongside restart problems after a stop phase. The fix there is new PCM software, done with a charger keeping the battery between 13.2 and 13.5 V. Ford's equivalent test for converter A (P0A94) compares calculated and measured current, 50 A for 4 s. Overheating of converter B is P0EA6.
Possible causes
- Engine or powertrain control software needing an update high
- Internal fault of converter B medium
- Poor supply or ground connection of converter B low
Symptoms
- MIL on
- Engine does not restart after an auto-stop, start-stop disabled
- Voltage dips in the 12 V network, for example audio dropouts
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P0EA5
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.