P0EA4
DC/DC Converter Current Sensor C Circuit Intermittent/Erratic
P0EA4 ends the current sensor C series and describes a signal that wavers or breaks off momentarily instead of failing steadily. No manufacturer documents P0EA4 publicly. A comparable published fault exists for the first channel: FCA bulletin 08-333-25 covers P0E55-00, the erratic code of current sensor A, on the 2025 Ram 1500 eTorque V6: there the 12 V battery loses charge, in bad cases until the pickup has to be towed, and FCA answers with a software update of the battery pack controller (BPCM). A software check is therefore worth doing before any part is replaced. CARB obliges makers to supervise such inputs. On the hardware side, a loose plug, a damaged pin or a joint that opens with temperature changes are the usual causes. Steady faults of sensor C are P0EA0, P0EA2 and P0EA3.
Possible causes
- Outdated control software evaluating the signal too strictly medium
- Loose plug or damaged pin on the sensor C path high
- Connection that opens with temperature changes low
Symptoms
- Sporadic warnings without a lasting fault
- 12 V battery not kept fully charged
- Start-stop occasionally disabled
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P0EA4
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 4 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.