P0EA3
DC/DC Converter Current Sensor C Circuit High
P0EA3 marks a current sensor C signal above the top of its accepted window. Electrically this means the signal line touching a voltage source, an open sensor ground or a failed output stage of the sensor; a genuine overcurrent of the converter is a different matter and has its own code, P0D33. No manufacturer documents P0EA3 publicly. Mercedes-Benz illustrates the fault type on the first current channel of the converter in the EQB and the G-Class, which logs P0E5400 for a short to plus; in that bulletin the entry comes from a wrong wake-up of the converter rather than from damaged wiring; a converter reset ends the error state. Ford treats raw current signals above 6.0 V as faulty. If only sensor C is affected, its path is the suspect. The low fault is P0EA2.
Possible causes
- Sensor C signal shorted to supply high
- Open ground of the current sensor medium
- Converter error state after wake-up low
Symptoms
- 12 V or high-voltage warning in the cluster
- Converter output stopped
- Reduced performance possible
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P0EA3
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.