OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P0EA2

DC/DC Converter Current Sensor C Circuit Low

P0EA2 is stored when current sensor C of a DC/DC converter reports a raw value under its lower limit. Because current sensors in these units normally place their zero-current output at mid-supply, a value near zero volts rarely means low current; it points to a ground short, a lost sensor supply or a broken signal path. No manufacturer documents P0EA2 publicly. The closest published case is Porsche's P0E9D00 on the B channel of the Taycan converter, a short to ground that in fact came from a monitoring threshold set too low and was cured with new software. Ford rates current inputs as faulty below 4.5 V raw. CARB asks for out-of-range checks of such inputs. The high fault of sensor C is P0EA3.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / numberE / A2

Possible causes

  • Sensor C signal shorted to ground high
  • Missing supply voltage of the current sensor medium
  • Monitoring threshold in the software set too tight low

Symptoms

  • Warning lamp and possibly a stop request
  • Converter switched off or derated
  • 12 V battery discharges while driving

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for P0EA2

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication