P0EA1
DC/DC Converter Current Sensor C Circuit Range/Performance
P0EA1 stands for a sensor C current reading that is electrically plausible yet disagrees with the converter's operating point or with its sister channels. If a converter measures several phase currents, those values should track each other, and one channel that deviates is a typical trigger. No manufacturer documents P0EA1 publicly. Ford's P0A94 test illustrates the approach for the boost converter of its hybrids: a deviation of over 50 A between measured and calculated inductor current, held for more than 4 s, counts as a fault. FCA shows how makers adjust such checks, turning the sensor A rationality code P0E52 into a one-trip fault for the Ram 1500 eTorque with flash 08-037-21. Hard circuit faults of sensor C use P0EA0, P0EA2 and P0EA3.
Possible causes
- Sensor C channel drifting away from the other channels medium
- Fault in the converter phase measured by sensor C medium
- Plausibility software in need of an update low
Symptoms
- MIL, possibly after one trip
- Reduced 12 V charging current
- Converter or drive power derated
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P0EA1
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 4 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.