P0EA0
DC/DC Converter Current Sensor C Circuit
P0EA0 covers circuit faults of a third current channel inside a DC/DC converter, sensor C. Converters with several phases or with separate input and output sensing can carry more than two current channels; the letter C simply names the third. It is used when that reading is missing or cannot be decoded and no sharper diagnosis fits; plausibility, too-low, too-high and unstable signals have P0EA1 to P0EA4. No manufacturer documents P0EA0 or any other sensor C current code in public sources. Ford's hybrid summary describes the kind of current input check involved, where the raw value must stay between 4.5 V and 6.0 V and the offset at power-up under 15 A. Such checks are mandatory under CARB. The equivalent codes for channels A and B are P0E51 and P0E9B.
Possible causes
- Defect in the converter's third current sensing channel high
- Damaged connector or wiring on the sensor C path medium
- Software fault in the signal evaluation low
Symptoms
- Warning for the high-voltage or 12 V system
- Converter limited to a reduced output
- MIL depending on the manufacturer
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P0EA0
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.