OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P0E9E

DC/DC Converter Current Sensor B Circuit High

P0E9E flags the B current channel of a DC/DC converter reading above its ceiling: the raw signal lies above anything the sensor should output. With a Hall sensor whose zero lies mid-scale, this usually means the signal line touches the supply or the reference ground has opened. No manufacturer documents P0E9E publicly. Mercedes-Benz shows the same fault type on the first channel: on the EQB and G-Class, P0E5400 denotes a short to battery plus on the converter's current sensor A and shows up with red 12 V and HV warnings after a faulty wake-up; the workshop checks it with a buck-mode test of about 30 s in XENTRY and then resets the converter. Porsche calls the B channel current sensor 2 and has its low fault as P0E9D. A real overcurrent belongs to P0D33.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / numberE / 9E

Possible causes

  • Sensor B signal shorted to supply voltage high
  • Open reference ground of the current sensor medium
  • Converter in an error state after wake-up, cleared by reset low

Symptoms

  • Red 12 V battery or HV warning
  • Converter stops supplying the 12 V network
  • Reduced drive power possible

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for P0E9E

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication