P0E99
DC/DC Converter Voltage Sensor C Circuit High
With P0E99 the controller finds the voltage sensor C reading of a DC/DC converter pinned near its upper limit. That points to the signal touching a battery feed or reference supply, or to a broken sensor ground that lets the input float up, rather than to a real converter overvoltage. No manufacturer documents P0E99 publicly. For channels A and B GM's 2025 engine tables (25OBDG03A) use more than 28 V as the limit for a 12 V converter, far beyond any genuine output, and confirm P0E34 or P0E39 after 320 of 400 failed samples as Type B. CARB demands such out-of-range checks. Comparing sensor C with the other channels and the battery voltage quickly separates a wiring fault from a converter problem; low readings are P0E98.
Possible causes
- Sensor C signal shorted to battery voltage or reference supply high
- Open sensor ground letting the signal float high medium
- Actual overvoltage from a faulty converter regulation low
Symptoms
- MIL and charging or 12 V warning possible
- Converter limits or stops its output
- Start-stop function unavailable
Inspection / repair
- Difficulty: hard
- DIY: shop recommended
What Pro shows you for P0E99
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 2 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.