OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P0E96

DC/DC Converter Voltage Sensor C Circuit

P0E96 opens the series for a third voltage measurement in a DC/DC converter, sensor C. It is the general circuit code, meant for a missing or electrically invalid signal; range, low, high and erratic faults of the same sensor follow from P0E97 to P0E9A. Where a converter has more than two voltage channels, for example input and output plus a redundant reading, C names the third. No manufacturer documents P0E96 or any sensor C code in public sources. For orientation, GM's 2025 engine tables (25OBDG03A) cover sensors A and B of a 12 V converter that supports engine auto-starts, with valid readings between 1 V and 28 V and Type B confirmation; FCA calls the first two channels voltage sensor 1 and 2. CARB asks for circuit faults of such inputs to be detected. Converter output may be cut back.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / numberE / 96

Possible causes

  • Measuring circuit for channel C inside the converter defective medium
  • Loose connector or damaged sensing lead medium
  • Software fault in the converter or its controller low

Symptoms

  • 12 V or converter warning, possibly with MIL
  • Start-stop or 12 V support restricted

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for P0E96

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 2 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication