OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P0E95

Drive Motor B Inverter Voltage Sensor B Circuit Intermittent/Erratic

P0E95 closes the sensor B series for drive motor B: the signal is unstable, with brief dropouts or spikes, rather than permanently low, high or implausible. No manufacturer documents P0E95 publicly. Published values for the neighbouring channels show why short events slip through the other tests: Mitsubishi rates sensor A of the rear motor (2023 Outlander PHEV) as low or high only after 0.3 s outside 0.55 V to 4.76 V, and its plausibility check needs 0.2 s of large deviation. CARB expects inputs to be monitored for circuit, range and rationality faults. Because a rear motor and its wiring are exposed to road spray and suspension movement, a corroded or loose connector is the first thing to check. The warning may appear only on rough roads and clear itself later.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / numberE / 95

Possible causes

  • Corroded or loose connector on the motor B inverter high
  • Harness damaged where it moves with the axle or suspension medium
  • Measuring circuit in the motor B inverter failing intermittently medium

Symptoms

  • EV or hybrid warning that appears and clears again
  • Second motor drops out briefly, uneven traction

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for P0E95

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 4 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication