P0E92
Drive Motor B Inverter Voltage Sensor B Circuit Range/Performance
P0E92 is stored when voltage sensor B of the drive motor B inverter gives a reading inside its electrical range that does not fit the other voltage values of the high-voltage system. No manufacturer documents P0E92 publicly. The closest published test is Mitsubishi's plausibility check P0DA4, written for the first voltage channel of the rear motor in the 2023 Outlander PHEV: with the boost converter off, the rear inverter voltage is compared with capacitor 1 and both capacitor 2 channels of the front unit, and a difference of 100 V or more to each of them for 0.2 s counts; the hints name the rear motor unit, battery management and the power drive unit. For drive motor A the same fault on sensor B is P0E8D. A drifting measurement or a wrong reference elsewhere are both possible, so all channels should be compared.
Possible causes
- Voltage channel B of the motor B inverter drifts medium
- Internal fault of the motor B inverter or motor unit medium
- Wrong comparison value from battery management or the front power electronics low
Symptoms
- MIL and hybrid or EV system warning
- Second drive motor switched off, reduced acceleration
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P0E92
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 4 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.