P0E91
Drive Motor B Inverter Voltage Sensor B Circuit
P0E91 is the circuit code for the second DC voltage channel, sensor B, in the inverter of drive motor B, usually the second electric machine or the rear axle motor. It applies when this signal is absent or electrically unusable without a more precise verdict; its partner channel A is coded P0DA3, and the matching code for drive motor A is P0E8C. No manufacturer documents P0E91 or its B-sensor siblings for motor B publicly. Mitsubishi illustrates the frame with sensor A of the rear motor on the 2023 Outlander PHEV: the rear motor unit reports its inverter voltage, which the front power electronics compare with their own capacitor values. CARB requires inputs of hybrid drive components to be monitored for circuit faults. Motor B is then usually switched off, and the car may drive with reduced power.
Possible causes
- Voltage channel B measuring circuit in the motor B inverter defective high
- Connector or harness of the motor B inverter loose or damaged medium
- Software fault in the motor B control unit low
Symptoms
- Hybrid or EV warning with MIL
- Loss of the second drive motor (for example no all-wheel drive), reduced power
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P0E91
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 4 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.