P0E90
Drive Motor A Inverter Voltage Sensor B Circuit Intermittent/Erratic
P0E90 is meant for a voltage sensor B signal of the drive motor A inverter that flickers, jumps or drops out for moments without staying wrong long enough for the low or high code. No manufacturer documents P0E90 publicly. The documented siblings show how short the window is: Mitsubishi's 2023 Outlander PHEV flags the same channel (V2M at capacitor 2) as too low or too high only after 0.16 s beyond 0.45 V or 4.75 V, and as implausible after 0.2 s of deviation, so shorter glitches need an extra stability test. CARB asks for input signals to be checked for circuit and rationality faults. In practice a loose low-voltage plug on the inverter, a chafed lead or a solder joint that opens with heat and vibration is the usual cause. Warnings may appear and vanish again.
Possible causes
- Loose or corroded low-voltage connector on the inverter high
- Chafed or partly broken signal lead medium
- Measuring circuit in the power electronics failing intermittently with heat or vibration medium
Symptoms
- Hybrid warning that comes and goes
- Short power interruptions or jerky electric drive
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P0E90
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 4 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.