OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P0E8C

Drive Motor A Inverter Voltage Sensor B Circuit

The inverter of drive motor A may measure its high-voltage DC level at more than one point; sensor B is the second of those channels. P0E8C is the general circuit code for it, used when the signal is missing or electrically invalid without a clear low, high or plausibility verdict. Sensor A of the same inverter uses P0D2D, and a mismatch between both is P2E1A. No manufacturer documents P0E8C itself. Mitsubishi shows what sensor B can be: in the 2023 Outlander PHEV the power drive unit reads the boosted capacitor 2 voltage on a main channel, called V2M, and assigns its faults to P0E8D to P0E8F, while capacitor 1 belongs to sensor A. CARB requires such inputs to be checked for circuit faults. Without a trusted value the controller limits or blocks electric drive.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / numberE / 8C

Possible causes

  • Sensing circuit for voltage channel B inside the power electronics defective high
  • Low-voltage connector or harness of the inverter loose or damaged medium
  • Software fault in the motor control unit low

Symptoms

  • Hybrid or EV system warning together with the MIL
  • Reduced electric drive power or vehicle not ready to drive

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for P0E8C

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 4 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication