P0E8B
Battery Charger B Input Voltage Sensor Circuit
P0E8B covers an electrical fault in the voltage measurement at the input of charger B: the controller gets no valid reading of the supply voltage. Range, low and high faults of this sensor have their own codes, P2E84, P2E85 and P2E86; charger A uses P0D3D for its first input voltage sensor. Some code lists call it input voltage sensor A of charger B. No manufacturer documents P0E8B publicly. Ford checks the voltage side of charger B through P0E87 with a 450 V limit, which is a judgment of the value, whereas P0E8B means the value cannot be read at all. CARB expects such inputs to be monitored for circuit continuity and range. The sensing is usually built into the charger, so after ruling out connectors the charger is the likely part. Charging is blocked until the fault clears.
Possible causes
- Voltage sensing circuit inside charger B defective high
- Loose or corroded connector, damaged sensing lead medium
- Charger software fault low
Symptoms
- Plug-in charging is not possible
- Charging fault message or charge-port indicator signals a fault
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P0E8B
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.