P0E88
Battery Charger B Input Current Too Low
P0E88 is set when charger B takes in less current than it should for the charging power it is asked to deliver, with voltage present. Its counterpart without a letter is P0D29. No manufacturer documents P0E88 in public sources. The neighbour P0E89 for too much current is documented by Ford, Toyota, Isuzu and Mercedes, so the input current of a B charger is clearly monitored. A low value with normal voltage suggests that the charger does not ramp up, that a resistive inlet or cable limits the flow, or that the charging station offers less current than expected. A measurement error is possible too, but those have their own sensor codes (P0E8A). CARB requires charger faults that limit the charging rate to be detected. Usually charging is just slow; driving is not affected.
Possible causes
- Charger B power stage does not reach the requested power medium
- High resistance at inlet contacts or in the charging cable medium
- Charging station or cable signals a lower current limit than expected low
Symptoms
- AC charging takes much longer than usual
- Charging stops or a charging fault is shown
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P0E88
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.