OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P0E86

Battery Charger B Input Voltage Too Low

P0E86 means charger B sees less voltage at its input than it needs to work, although charging has been requested. It mirrors P0D27, which carries no letter and is used for the first charger. No manufacturer documents P0E86 publicly. Ford's plug-in hybrid summary (OBDSM1901) does list the opposite case on the same input, P0E87, which shows that the B input codes are in real use. A low input voltage is often caused outside the car: a weak or long house circuit, a faulty extension or charging cable, or a charging station that sags under load. Inside the car, worn inlet contacts or a bad high-voltage connection to the charger can do the same. CARB does not require faults originating in the supply to be detected, so an unconfirmed code may just reflect a poor socket.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / numberE / 86

Possible causes

  • Weak supply at the socket or charging station, long or undersized house wiring high
  • Faulty charging cable, adapter or extension lead medium
  • Worn or burnt contacts in the charge inlet or its wiring to the charger medium
  • Voltage measurement inside charger B reads too low low

Symptoms

  • AC charging does not start or stops shortly after starting
  • Charging works at another socket or station

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P0E86

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication