P0E85
Battery Charger B Temperature Too High
P0E85 reports that the second charger stage or second on-board charger, labelled B, has become hotter than its own protection limit allows. Like the A counterpart P0D24, it is a heat verdict, not a sensor fault: the charger trusts its reading and cuts back power or stops to save its semiconductors. No manufacturer documents P0E85 with set conditions in public sources. Toyota shows that the letter B is real hardware: the 6.6 kW charger of the RAV4 Prime logs its input current fault as charger B (P0E89). CARB asks plug-in hybrids to flag charger failures that stop charging or reduce its rate. Typical triggers are poor coolant flow or air flow, a clogged heat exchanger or an internal defect. Expect slow or aborted AC charging, not loss of drive.
Possible causes
- Too little coolant or air flow through charger B (low coolant, pump, blocked fins) high
- Internal defect in the power stage of charger B medium
- Long full-power charging in very hot surroundings low
Symptoms
- AC charging slows down noticeably or stops before the battery is full
- Charging fault message or flashing charge-port indicator
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P0E85
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.