OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P0E84

Auxiliary Cooling System Coolant Temperature Sensor A Circuit High

P0E84 is the high-voltage case for sensor A of the auxiliary loop: the signal sits near the reference voltage, which an NTC thermistor would only produce at extreme cold. Far more often the circuit is open, from an unplugged connector, a broken wire or a sensor with an internal break, or the signal line is shorted to a voltage source. The module then cannot judge the temperature of that loop and falls back to substitute values, which can make heater or pump control less precise. No manufacturer documents P0E84 publicly. Ford's 2019 hybrid summary uses P2185 for the equivalent fault of its heater-loop sensor ECT2, set after the driver signals a fault for 5 seconds. CARB wants temperature inputs tested for readings beyond their valid span. P0E83 is the low counterpart.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / numberE / 84

Possible causes

  • Unplugged connector or broken sensor wire high
  • Sensor A open internally medium
  • Signal wire shorted to a voltage source low

Symptoms

  • Check engine light
  • Scan tool shows the loop at minimum temperature
  • Less precise cabin heating

Inspection / repair

  • Difficulty: easy
  • DIY: possible

What Pro shows you for P0E84

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 2 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication