OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P0E82

Auxiliary Cooling System Coolant Temperature Sensor A Circuit Range/Performance

P0E82 is set when temperature sensor A of the auxiliary cooling loop delivers a clean electrical signal whose value does not make sense against other temperatures. No manufacturer documents P0E82 publicly, but Ford's 2019 hybrid summary spells out such a plausibility test for its heater-loop sensor ECT2 under P2183. After at least 360 minutes of soak both coolant sensors must agree within 30 °F; with the loops joined and the electric pump above 2,500 rpm for 90 seconds, ECT2 plus a 7 °F hose loss must stay within 30 °F of the engine sensor; and the reading must stay between −30 and 275 °F. CARB includes hybrid component temperature sensors in its rationality requirements. A sensor that drifts, or a stuck bypass valve that keeps the loops apart, can trip it. Pure circuit faults are P0E81, P0E83 and P0E84.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / numberE / 82

Possible causes

  • Sensor A reading drifted out of tolerance high
  • Stuck bypass valve keeping the loops from mixing medium
  • Low coolant or air around the sensor tip medium
  • Corroded terminals shifting the signal low

Symptoms

  • Check engine light
  • Cabin heat regulation off target

Inspection / repair

  • Difficulty: medium
  • DIY: possible

What Pro shows you for P0E82

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication