P0E80
Coolant Bypass Valve B Control Stuck Closed
P0E80 reports that bypass valve B has stayed shut although flow through it is requested. Stellantis gives the criterion for the Jeep Wrangler plug-in hybrid (2021 to 2023): the code sets once engine coolant and the inlet of the electric coolant heater differ by more than 40 °F, about 22 K. Its service case S2208000205 and bulletin 07-006-23 (cars built on 4 June 2022) trace this to hoses on the three-way valve that were fitted one port off; drivers notice a lit check engine light and at times no heat, and the fix is rerouting the hoses using the marks on the valve. On the 2022 to 2023 Pacifica plug-in hybrid, bulletin 07-008-23 blames a valve clogged by machining debris and replaces it. CARB covers such outputs under functional monitoring. P0E7F is the open counterpart.
Possible causes
- Hoses at the three-way valve shifted by one port (Wrangler 4xe, bulletin 07-006-23) high
- Valve blocked by machining debris (Pacifica Hybrid, bulletin 07-008-23) medium
- Valve B actuator seized in the closed position low
Symptoms
- Check engine light
- Intermittent loss of cabin heat
- Electric mode may be disabled
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P0E80
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 4 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.