OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P0E7F

Coolant Bypass Valve B Control Stuck/Open

P0E7F means coolant bypass valve B is judged to stay open while the module wants it closed. Stellantis documents it on the Chrysler Pacifica plug-in hybrid with the 3.6 litre engine: bulletin 07-008-23 (June 2023) covers cars built from 3 November 2022 to 10 February 2023, where machining debris from the cylinder head water jackets can collect inside the three-way valve. The MIL comes on and electric driving may be locked out while the petrol engine still works. To reproduce it, the bulletin has the car idle 10 minutes in engine mode, then run 5 minutes on battery with heat on and the blower below half; if P0E7F or P0E80 appears, the valve is replaced. The Hurricane software bulletins also list the code. P0E80 is the stuck closed case; P0E79 is the same fault on valve A.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / numberE / 7F

Possible causes

  • Machining debris lodged in the three-way coolant valve (Pacifica Hybrid, bulletin 07-008-23) high
  • Worn or broken internals in valve B medium
  • Calibration issue addressed by an engine control update (3.0 Hurricane) low

Symptoms

  • MIL on
  • Electric drive mode unavailable, engine runs instead
  • Reduced or unstable cabin heat

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P0E7F

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 4 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication