OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P0E7E

Coolant Bypass Valve B Control Circuit Range/Performance

P0E7E marks a control circuit of coolant bypass valve B that is electrically intact but does not respond as calibrated: actuator current, feedback or timing lie outside the window the software expects. Stellantis lists P0E7E most often of the valve B codes. Bulletin 18-106-25 from December 2025 covers model year 2026 RAM 1500 trucks with the high-output Hurricane built up to 7 October 2025 and calls for an engine control module update; the 2026 bulletins 18-071-26 and 18-082-26 repeat the code for the 2025 RAM and Wagoneer. Since a software fix is the documented remedy, a sluggish but working valve often turns out not to be the culprit. CARB requires functional monitoring of outputs, not only circuit checks. The pure wiring faults are P0E7B to P0E7D, mechanical sticking P0E7F and P0E80.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / numberE / 7E

Possible causes

  • Engine control calibration fixed by bulletin 18-106-25 or 18-071-26 (Stellantis) high
  • Valve B actuator moving slowly or not reaching its target medium
  • Corroded connector raising circuit resistance low

Symptoms

  • Check engine light
  • Usually no change in driving behaviour

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P0E7E

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication