OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P0E7D

Coolant Bypass Valve B Control Circuit High

P0E7D is stored when the line driving valve B sits above its expected level, for instance with the wire chafed against a powered line or a driver that cannot pull the circuit down. Stellantis names this code in the same software bulletins as its low sibling: 18-071-26 for the 2025 RAM pickup with Hurricane power, plus 18-082-26 (SO engine) and 18-083-26 (HO engine) for the 2025 Wagoneer and Grand Wagoneer. All of them require a lit check engine light, and the fix is a reflash of the engine control module, sometimes alongside oxygen sensor and airflow codes. Before replacing hardware it is therefore worth checking for such an update. CARB expects outputs like this to be checked for circuit faults. The low case is P0E7C, an open circuit P0E7B, a networked actuator that stops talking U063C.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / numberE / 7D

Possible causes

  • Outdated engine control software (Stellantis bulletins 18-071-26, 18-082-26, 18-083-26) high
  • Valve B control wire shorted to a voltage source medium
  • Open circuit pulled high by the module input low

Symptoms

  • Check engine light
  • Other stored codes after the same software issue

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P0E7D

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 2 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication