P0E7C
Coolant Bypass Valve B Control Circuit Low
P0E7C says that the wiring which operates bypass valve B reads too low, typically because a wire or the actuator itself has a ground fault. Stellantis documents the code: bulletin 18-071-26 (revisions A and B, October 2026) for 2025 RAM 1500 pickups fitted with the Hurricane straight-six, SO or HO twin-turbo and bulletin 18-082-26 for the 2025 Wagoneer and Grand Wagoneer name it among the faults cured by new engine control software, with the check engine light on. That points to calibration as a frequent trigger on these engines, besides real wiring damage. A low reading on the line keeps the valve from being driven as intended, so the coolant split between loops is no longer under control. CARB lists such outputs among the components that need circuit monitoring. High and open faults are P0E7D and P0E7B.
Possible causes
- Engine control software needing the update from the manufacturer bulletin (Stellantis 3.0 Hurricane) high
- Valve B control wire shorted to ground medium
- Internal short in the valve B actuator low
Symptoms
- Check engine light
- Often no noticeable driving symptom
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P0E7C
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 2 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.