P0E7B
Coolant Bypass Valve B Control Circuit/Open
P0E7B covers an interrupted control circuit of the second coolant bypass valve, B. The module sees no proper load on its output, so the valve cannot be positioned and stays wherever it last was or springs back to its rest position. Stellantis does use the valve B family: its 2025 and 2026 bulletins for the RAM 1500 and the Wagoneer with the 3.0 litre Hurricane engine list P0E7C to P0E7F together with U063C, a lost link to the valve B actuator, and its plug-in hybrids use P0E7F and P0E80. P0E7B itself appears in none of these published documents. Ford's 2019 hybrid summary shows the usual circuit test on a comparable valve, a driver fault lasting over 5 seconds. CARB requires circuit checks on such outputs. Short and plausibility faults are P0E7C to P0E7E.
Possible causes
- Broken wire or unplugged connector at valve B high
- Internal open in the valve B actuator medium
- Missing supply or ground at a networked valve actuator low
Symptoms
- Check engine light
- Heating or engine warm-up behaves differently
Inspection / repair
- Difficulty: medium
- DIY: possible
What Pro shows you for P0E7B
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 2 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.