OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P0E7A

Coolant Bypass Valve A Control Stuck Closed

P0E7A is the reverse of P0E79: valve A should open and let coolant pass, but the temperature picture says it has stayed shut. Depending on what the valve connects, the result is a loop that gets no flow from the engine side, so heater output or heat transfer drops, or a branch that heats up because it is cut off from circulation. No manufacturer documents P0E7A publicly. The closest published case is the sibling on valve B: Stellantis sets P0E80 once the engine coolant reading and the electric heater inlet are over 40 °F apart, and blames misrouted hoses or a clogged three-way valve on Wrangler and Pacifica plug-in hybrids. Under CARB, actuators of this kind need a functional check as well. Electrical faults on valve A are P0E75 to P0E78.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / numberE / 7A

Possible causes

  • Debris or deposits blocking valve A high
  • Actuator or gear stuck in the closed position medium
  • Air pocket after a coolant service blocking flow low

Symptoms

  • Little or no cabin heat
  • Rising coolant temperature in the affected loop
  • Check engine light

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P0E7A

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication