P0E75
Coolant Bypass Valve A Control Circuit/Open
P0E75 is the basic electrical code for coolant bypass valve A: the control unit finds that the output switching the valve, or the wire leading to it, does not form a closed circuit, in most cases because of an open. Valves of this kind usually divert coolant between loops, for example between the engine and a heater loop that keeps the cabin warm while a hybrid drives electrically. No manufacturer documents P0E75 publicly. Ford's 2019 hybrid and plug-in summary watches a comparable valve under the older codes P2682 and P2683 and relies on the fault status of its smart driver, which must persist beyond 5 s. CARB counts such actuators among the comprehensive components that need circuit checks. Low, high and plausibility faults of this circuit are P0E76 to P0E78; drivers mostly notice weaker heating.
Possible causes
- Broken wire or loose connector on the valve A control circuit high
- Burnt or internally open coil/motor in valve A medium
- Coolant or water ingress corroding the valve connector pins medium
- Faulty output driver in the engine or hybrid control module low
Symptoms
- Check engine light
- Little or no cabin heat, especially in electric mode
- Engine warms up more slowly or runs more often than usual
Inspection / repair
- Difficulty: medium
- DIY: possible
What Pro shows you for P0E75
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 2 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.