OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P0E74

Hybrid/EV Battery Voltage Internal Isolation Fault

P0E74 reports that the insulation between the cells or internal high-voltage parts of the traction battery and its housing has become too weak, as measured inside the pack. P0AA6, by contrast, covers isolation of the whole high-voltage system. Audi uses P0E74 codegenau: a 2018 bulletin for the A3 e-tron (model years 2017 and 2018) names it together with P0AA6 in the battery regulation control module J840, with the battery warning lamp on; workshops were asked to quarantine the car and contact technical support before replacing parts. As a reference for typical limits, GM's 2019 hybrid tables flag P0AA6 below 325,000 ohm. CARB treats high-voltage isolation detection as a safety-only system. Coolant or water inside the pack, damaged cell wiring and a faulty isolation monitor are typical.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / numberE / 74

Possible causes

  • Coolant leak or water ingress inside the battery pack high
  • Chafed or damaged insulation of internal high-voltage wiring medium
  • Faulty isolation measurement in the battery management low

Symptoms

  • Battery or high-voltage warning lamp on
  • Vehicle may not enter ready mode or blocks charging
  • Electric driving disabled

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for P0E74

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 1 warning for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication