P0E72
Control Pilot Signal Low Frequency
P0E72 refers to the pulse train that an AC charging station places onto the pilot wire. Under SAE J1772, matched by IEC 61851-1, this is a rectangular ±12 V signal at 1 kHz, and its duty cycle tells the car how much current it may draw. The vehicle measures the period of this signal; if it is clearly slower than 1 kHz, the reading is distrusted and P0E72 is stored, because a wrong frequency also makes the current limit unreliable. No manufacturer documents P0E72 publicly. A US Department of Energy test report on pilot-line communication (PNNL) treats the 1000 Hz frequency and pulse width as values that added equipment must not disturb. Causes are a faulty station or adapter, interference on the line, or the car's measuring circuit. P0E73 is the high case; voltage faults are P0CF4 to P0CF6.
Possible causes
- Charging station or portable charger generating an off-spec pilot high
- Faulty charging adapter or extension in the cable path medium
- Pilot measuring circuit in the vehicle charger misreading low
Symptoms
- AC charging does not start or stops at one station
- Charging works normally at other stations
Inspection / repair
- Difficulty: easy
- DIY: possible
What Pro shows you for P0E72
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.