OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P0E6E

Battery Charging System Precharge Contactor Control Circuit Range/Performance

P0E6E is stored when the coil circuit of the charging precharge contactor neither shows a clean short nor an open, but its electrical behaviour does not match the command: coil current outside the expected window, a slow pull-in, or feedback that lags behind the switching command. Rising contact resistance in the connector, a coil with changed resistance or a weak supply to the driver are typical. No manufacturer documents P0E6E publicly. Related GM monitoring in the 2019 hybrid tables shows the measured quantity, a current sense feedback of the contactor driver with a 194 mA minimum while on, used there for the positive charging contactor (P0D0A). CARB requires output components to be checked for proper function, not only for circuit faults. Hard faults on the same circuit are P0E6D, P0E6F and P0E70.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / numberE / 6E

Possible causes

  • Increased contact resistance in the coil connector medium
  • Contactor coil resistance out of specification medium
  • Low supply voltage at the contactor driver low

Symptoms

  • Charging starts only on some attempts
  • Fault appears mostly in cold weather or with a weak 12 V battery

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for P0E6E

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication