P0E6B
Battery Charging System Precharge Contactor Circuit Stuck Closed
P0E6B means the precharge contactor of the charging system appears to stay closed although it has been told to open, usually because its contacts have welded. The battery management notices this when the charger side carries voltage before any precharge was requested, or when it does not drop after switch-off. That is a safety matter: the charging path may remain live. No manufacturer documents P0E6B publicly. Mitsubishi's i-MiEV manual, published as a 2019 bulletin, handles the comparable weld of its charging contactor under P0AE2 and checks it as the high-voltage system is activated; besides wiring and the contactor itself it lists the combined charger and DC-DC unit and other high-voltage loads as possible causes. CARB requires faults that disable charging to be detected. The opposite fault is P0E6C.
Possible causes
- Precharge contactor contacts welded together high
- Coil kept energised by a control line fault low
- Residual voltage from another high-voltage unit misread as a closed contactor low
Symptoms
- Charging blocked and high-voltage warning displayed
- Vehicle may refuse to switch to ready mode
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P0E6B
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 1 warning for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.