OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P0E6A

Battery Charging System Precharge Contactor Circuit

P0E6A is the general code for the precharge contactor of the battery charging system. Before the main charging contactors close, this small contactor feeds the charger side through a resistor so the voltage can rise gently towards pack voltage; without it the main contacts would arc. The code collects faults of this branch that fit none of the more specific siblings. No manufacturer documents P0E6A publicly. GM's 2019 hybrid tables watch the same function under their own codes: the charger bus must reach 95 to 105 percent of pack voltage within 0.7 seconds (P0D26), and battery current above 3 A for about 87 ms during precharge sets P3061, both Type A. CARB requires charger malfunctions that block charging to be detected. Stuck faults are P0E6B and P0E6C, coil circuit faults P0E6D to P0E70.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / numberE / 6A

Possible causes

  • Precharge resistor burnt open or overheated medium
  • Worn or sluggish precharge contactor in the charging path medium
  • Charger-side voltage measurement reading wrongly low

Symptoms

  • Charging session aborts right at the start
  • Charging not possible, driving usually still possible

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for P0E6A

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication