OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P0E69

Control Pilot Indicator Control Circuit Range/Performance

P0E69 belongs to the output that drives the small lamp or LED showing the state of the pilot connection to the charging station. Range/Performance means the driver circuit reports a state that does not fit what the module commanded, without a clear short or open. No manufacturer documents P0E69 publicly. GM's Volt tables for 2011 and 2012 show how such a driver is watched, under the older code P0D2B: one sample every 100 ms, a ground short counted while the LED is commanded on with the cord plugged in (12 of 15 samples), a short to battery or an open while it is off and unplugged (40 of 50), Type B. Today the hard faults are split into P0D2B, P0E3D and P0E3E. The pilot signal itself is not affected; charging usually works, only the indication is wrong.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / numberE / 69

Possible causes

  • Indicator LED aged or partially failed, drawing the wrong current medium
  • Loose contact at the charge port lamp connector medium
  • Faulty feedback of the LED driver in the control unit low

Symptoms

  • Charge port indicator flickers, stays dark or shows the wrong state
  • Charging itself usually unaffected

Inspection / repair

  • Difficulty: easy
  • DIY: shop recommended

What Pro shows you for P0E69

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication