OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P0E68

Battery Charger Control Circuit Range/Performance

P0E68 is the plausibility code of the charger command line: no short or open is present, yet the charger does not react to the command in the expected way or in the expected time. Typical triggers are a charger that wakes too slowly, a voltage drop on the line that leaves the level ambiguous, or software in the two modules that disagrees. No manufacturer documents P0E68 publicly. A close analogue is Ford's P0E64 on its 2019 hybrids: once the charge wake-up line is high, the battery energy control module must report ready within 30 seconds. GM's general circuit code for the same line is P0E65. CARB requires detection of charger faults that block charging or reduce its rate. Pure wiring faults are P0E65 to P0E67; a software update is often the first step.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / numberE / 68

Possible causes

  • Charger and control unit software not matching medium
  • Charger responding late or not at all to the command medium
  • Excess resistance in the line distorting the signal level medium

Symptoms

  • Charging starts late, stops or fails intermittently
  • Charge timer or scheduled charging not working

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P0E68

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication