OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P0E5F

Battery Charger Coupler Temperature A Too High

P0E5F is not a sensor fault: the coupler temperature sensor A works, but the charging inlet really got too hot. Three makers document it. Ford links it on the 2021–2023 Mustang Mach-E (stored in the SOBDM) to a red flashing charge indicator and no charging from a 48 A level 2 station, while 32 A or less may still work; SSM 51866 calls for a new charge port. GM's PIT5904 for the 2022 Hummer EV and BrightDrop EV600 says the pin temperatures are watched all the time and that, once the code has tripped, charging resumes only after the plug is pulled and reinserted, even when the pins have cooled; worn station plugs are a suspect. Mercedes stores P0E5F97 in the AC charger of several 2024 plug-in hybrids in strong sun and calls it no fault, with power cut back until the temperature drops.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / numberE / 5F

Possible causes

  • Excessive contact resistance in the vehicle charge port (Ford replaces the port) high
  • Worn or damaged plug of the charging cable or station medium
  • High ambient temperature or direct sun while charging (Mercedes) medium
  • Charging control software (GM update announced) low

Symptoms

  • Charging stops or runs at reduced power
  • Charge indicator red or flashing red, warning in app or cluster
  • Charging restarts only after unplugging and replugging

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for P0E5F

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 1 warning for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication