OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P0E5E

Battery Charger Control Module A Processor Performance

P0E5E reports that the processor of the on-board charger's control unit fails its self-tests. Mitsubishi spells this out for the 2023 Outlander PHEV: P0E5E-00 means a ROM checksum (CRC) error or a RAM read/write error in the charger control; the code lights both the PHEV warning and the MIL. In the Volkswagen group the code is stored by the battery management module (address 8C). Bentley's information 2066497/1 for the 2021 Bentayga Hybrid lists it with charger faults when the car will not charge or stops charging, and the remedy there is a new on-board charger (AX4). Audi's on-car analysis list of June 2026 names P0E5E00 for Q5 PHEV 2024–2025 with a check engine light after charging and asks dealers to contact technical support. Non-processor faults of the module are P0D67.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / numberE / 5E

Possible causes

  • Control electronics of the on-board charger defective (unit replacement) high
  • Corrupt or outdated charger software medium
  • Unstable 12 V supply or ground of the charger during start-up low

Symptoms

  • Plug-in charging impossible or interrupted
  • MIL and hybrid/PHEV warning, sometimes right after charging

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for P0E5E

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 1 warning for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication