P0E5D
DC/DC Converter Enable Circuit Intermittent/Erratic
P0E5D adds the intermittent case to the DC/DC converter enable codes P0A11 (open), P0A12 (low) and P0A13 (high). Through the enable line a hybrid or body controller switches the converter on and off; if that line flickers, the converter keeps stopping and restarting. Converter data sheets show how simple the input often is: on Poclain's 48 V unit the converter runs while the enable pin is tied to input positive or left floating and shuts off when it is pulled to input negative, so a poor ground or chafed wire can cycle it. No manufacturer documents P0E5D publicly. Ford's hybrid summaries use only P0A11 and attach several internal boost converter faults to it. CARB requires output components to be checked for circuit faults. The driver may see the 12 V voltage dip or a battery warning that comes and goes.
Possible causes
- Loose or corroded terminal on the enable line high
- Poor ground reference between controller and converter medium
- Chafed enable wire touching ground intermittently medium
- Output stage in the commanding controller faulty low
Symptoms
- 12 V battery warning that comes and goes
- Fluctuating system voltage, flickering lights
- Hybrid warning, possibly reduced power
Inspection / repair
- Difficulty: hard
- DIY: shop recommended
What Pro shows you for P0E5D
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.