OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P0E5C

DC/DC Converter Temperature Sensor C Circuit Intermittent/Erratic

P0E5C flags a sensor C signal that changes faster than the part it watches could heat or cool. A converter inductor or heat sink has thermal mass, so a jump of many degrees within a few milliseconds points to a contact problem in the circuit, not to the converter itself. No manufacturer documents P0E5C publicly. The sensor is known from Ford, where sensor C watches the boost converter inductor and is checked only through P0E59 with fixed voltage and temperature limits; an erratic check is not described there. CARB requires hybrid input components to be monitored for circuit faults. Typical causes are a loose terminal, vibration damage or moisture at the converter connector. The fault may come and go between drives, so a wiggle test with live data helps more than a static measurement.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / numberE / 5C

Possible causes

  • Loose or widened terminal at the sensor or converter connector high
  • Moisture or corrosion in the connector medium
  • Chafed wire with intermittent contact low

Symptoms

  • Hybrid warning that comes and goes
  • Short episodes of reduced electric power

Inspection / repair

  • Difficulty: hard
  • DIY: shop recommended

What Pro shows you for P0E5C

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 4 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication