OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P0E59

DC/DC Converter Temperature Sensor C Circuit Range/Performance

P0E59 is the best-documented member of this group. Ford's hybrid OBD summaries from 2015 to 2019 assign it to the inductor temperature sensor of the variable voltage converter and monitor it without pause once 500 ms have passed since power-up, provided the 12 V supply lies between 6 and 19 V. It fails on any of three conditions: a sensor voltage under 0.067 V or over 4.86 V, an inductor reading above 165 °C for 1 s, or a value more than 30 °C away from engine coolant temperature after a soak of 180 minutes. Ford thus folds the electrical range checks into this code instead of using P0E5A/P0E5B. FCA also uses P0E59 on the 2021 Ram 1500 eTorque; bulletin 08-037-21 makes it a one-trip code with new HCP software. Sensors A and B have P0C39 and P0C3E as their plausibility codes.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / numberE / 59

Possible causes

  • Inductor temperature sensor drifting, reading off after cold soak medium
  • Inductor really overheating, e.g. due to weak electronics cooling medium
  • Hybrid control software (FCA HCP update) medium
  • Short or open in the sensor circuit (Ford range limits) low

Symptoms

  • MIL on, at FCA after one faulty drive
  • Reduced hybrid assist or electric driving
  • Hybrid system warning

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for P0E59

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 4 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication