OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P0E58

DC/DC Converter Temperature Sensor C Circuit

P0E58 stands for a general circuit fault of the third temperature sensor in a DC/DC converter, after sensors A (P0C38 ff.) and B (P0C3D ff.). Which part of the converter sensor C watches is up to the maker. At Ford it is the inductor of the variable voltage converter, the boost stage of its full hybrids, but Ford uses only the plausibility code P0E59 for it. No manufacturer documents P0E58 publicly. The code is meant for a fault the controller can detect without being able to classify it as too low, too high or implausible, for example an unstable reference or supply. CARB requires circuit monitoring of hybrid input components. Without this reading the controller protects the converter by limiting its power, which can cut electric assist.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / numberE / 58

Possible causes

  • Sensor connection or wiring damaged or corroded medium
  • Temperature sensor in the converter defective medium
  • Sensor reference or evaluation circuit in the converter faulty low

Symptoms

  • Hybrid system warning
  • Reduced electric assist or power

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for P0E58

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication