P0E55
DC/DC Converter Current Sensor A Circuit Intermittent/Erratic
P0E55 deals with a current sensor A reading that flickers or vanishes for moments instead of failing for good. FCA documents it repeatedly for the Ram 1500 with eTorque mild hybrid, where the DC/DC converter sits in the 48 V battery pack and is run by the battery pack control module (BPCM). Bulletin 08-030-24 for the 2019 model lists P0E55 among ten BPCM codes; 08-333-25 and its revision 08-283-26 for the 2025 truck with the 3.6 litre V6 name it alone and describe the result: the 12 V battery is not kept charged, runs flat soon after driving and may leave the truck needing a tow, later also with limp-home mode and disabled start/stop. In all cases the fix is new BPCM software, not a part. Steady circuit faults are P0E51, P0E53 and P0E54.
Possible causes
- Battery pack control module software (FCA eTorque, reflash) high
- Loose or corroded contact in the sensor path medium
- Current sensor or converter electronics failing intermittently low
Symptoms
- MIL on
- 12 V battery not charging, flat soon after driving
- Limp-home mode and start/stop disabled
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P0E55
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 4 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.