P0E51
DC/DC Converter Current Sensor A Circuit
P0E51 is the general circuit fault of current sensor A in a DC/DC converter, the element that tells the converter's controller how many amps flow through its power stage. The code covers a signal path that is broken in a way the controller cannot sort into low, high or implausible. No manufacturer documents P0E51 publicly. The same sensor appears in Mercedes-Benz information LI54.10-P-079533 for the EQB and G-Class, where a short to positive is stored as P0E5400. Ford's hybrid summaries show what such a check looks at: at power-up the inductor current sensor of the boost converter must show less than 15 A offset and a raw signal between 4.5 and 6.0 V, though Ford files these faults under P0A11. CARB requires circuit checks on hybrid input components. Converter output is usually limited.
Possible causes
- Current sensor inside the converter defective (usually not replaceable separately) medium
- Loose, corroded or damaged sensor connection or harness medium
- Fault on the converter control board or its sensor supply medium
- Converter or hybrid control software needs an update low
Symptoms
- Hybrid or 12 V battery warning in the instrument cluster
- 12 V battery is charged poorly or not at all
- Reduced electric power or limited hybrid functions
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P0E51
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.