P0E50
Motor Electronics Coolant Pump B Control Circuit Intermittent/Erratic
P0E50 is the intermittent or erratic fault of the control circuit for coolant pump B, the second electric pump some hybrids use in the inverter and motor electronics cooling. No manufacturer documents P0E50 publicly. The closest published example is Ford's pump A version, P0E4F, stored when the pump's feedback leaves its expected frequency or duty cycle for over 1 s. Second pumps of this kind are in service: on the 2024 Jeep Compass 4xe, Stellantis bulletin 08-200-24 cures the pump B performance code P0C74 by reprogramming the hybrid control processors. CARB requires inverter cooling outputs to be monitored for circuit faults. Steady open, low and high faults of pump B are P0B38 to P0B3A. Short dropouts briefly reduce coolant flow and may trigger a power limit.
Possible causes
- Intermittent contact at the pump B connector or a harness splice high
- Pump B electronics producing an unstable signal medium
- Control module software evaluating the pump signal too strictly low
Symptoms
- Warning light that appears now and then
- Temporary power reduction under high load or heat
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P0E50
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 4 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.